BMKYC - AS960 BRUSH ON SEALER/ADH, PREP COAT & TEXTILE MED
- MSDS: BMKYC
- Manufacturer: DUNCAN ENTERPRISES
- Product Name: AS960 BRUSH ON SEALER/ADH, PREP COAT & TEXTILE MED
- National Stock Number: 6850-00F021062
Product Identification
Product ID:AS960 BRUSH ON SEALER/ADH, PREP COAT & TEXTILE MED
MSDS Date:01/01/1992
FSC:6850
NIIN:00F021062
MSDS Number: BMKYC
Responsible Party
FRESNO, CA 93727-7819
US
Emergency Phone: 209-445-1222
Info Phone: 209-291-4444
Preparer: CURT SATHRE
Cage: 21546
Contractor
Telephone: 209-291-4444
Cage: 21546
Ingredients
NON-HAZARDOUS FOR INGREDIENTS
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONTOXIC. ABRASIVE CAN SCRATCH EYES.
Explanation of Carcinogenicity:NONE
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:USE APPROPRIATE TECHNIQUES & MEDIA FOR SURROUNDING
FIRE.
Unusual Fire/Explosion Hazard:MATERIAL CAN SPATTER ABOVE 212F. POLYMER
FILM CAN BURN.
Accidental Release
Spill Release Procedures:CLEAN UP PROPERLY W/PAPER TOWELS & WET SPONGE.
Handling
Handling and Storage Precautions:KEEP CONTAINER SEALED.
Other Precautions:DON'T INHALE MIST. AVOID CONTACT W/EYES.
Exposure Controls
Respiratory Protection:IF SPRAYING, DON'T INHALE MIST. USE RESPIRATOR
THAT IS NIOSH APPROVED FOR SPRAYS & MISTS.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING.
Eye Protection:RECOMMENDED
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE FOLLOWED.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Spec Gravity:1.1
Evaporation Rate & Reference:(BU AC = 1): 1
Solubility in Water:INSOLUBLE
Appearance and Odor:OPAQUE-COLORED LATEX PAINT
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPS >212F
Disposal
Waste Disposal Methods:PUT PAPER TOWELS IN TRASH & RINSE OUT SPONGE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.